SAER Elettropompe S.pA. is a leading Italian producer and supplier of surface and submersible pumps and motors, with over 60 years' experience in the Italian and international markets. Letaba Dewatering is a sole distributor of the SAER pumps in Africa, allowing us to offer an all-round solution to our customers with maximum flexibility and innovation.
• Centrifugal end suctions
• Vertical & Horizontal Multistage
• Split Casing
• Borehole pumps & motors
• Domestic range of pumps
IR - STANDARDISED MONOBLOC ELECTRIC PUMP
One of SAER's longest-running product series, completely redesigned to offer the highest performance in terms of output and efficiency. Ideal for recirculation and air conditioning systems, water supply and pressurisation groups. Various types of mechanical seals are available, also for food contact applications.
NCB - STANDARDISED BARE SHAFT PUMPS
Centrifugal pump meeting EN-733, used for firefighting, heating and cooling systems, water supply, irrigation, industry and the naval and mining sectors. Various types of mechanical or soft shaft seals and wear rings are available, depending on the required application. The pump can also be supplied coupled to a diesel engine.
MG - STANDARDISED PUMP WITH RIGID COUPLING
SAER pumps with rigid couplings offer a solid and reliable design which allows easy maintenance. Ideal for firefighting and irrigation, heating and air conditioning systems, heat recovery and pressurisation groups.
IN-LINE | HIGH FLOW | ELECTRIC PUMPS
L - IN-LINE
The L series includes 27 models, from DN 32 up to DN 150, from 0,37 to 75 kW, 50 and 60 Hz, 2 and 4 poles. Applications: hot/cold water circulation for in line inlet/outlet pipe line, ideal for installation in series, directly to the conduit, in civil and industrial plants for heating, cooling, hot water for sanitary use and other civil and industrial applications. Availables in different materials and configurations.
NCBK - HIGH FLOW-RATE BARE SHAFT PUMPS MEETING AND EXCEEDING EN 733
One of the widest product ranges on the Made in Italy market, used for firefighting, heating and cooling systems, water supply, irrigation, industry and the naval and mining sectors. Various types of mechanical and soft shaft seals (standard) and wear rings are available, depending on the required application. Version for coupling to diesel engines available.
SKD - HIGH FLOW RATE SPLIT CASING PUMPS
One of the few examples of this type of product designed and produced in Italy, as proven by the short delivery times. High efficiency and reliability provide a pump with minimal maintenance costs. The pump can also be supplied coupled to a diesel engine. Various types of mechanical and soft shaft seals (standard). Applications: dams, municipalities, power plants, mining, irrigation, water supply whenever high flow rates are required.
NCA - ELECTRIC PUMPS FOR DRAINAGE AND WASTE WATER FOR DRY INSTALLATION
Suitable for pumping domestic and industrial foul water, viscous and corrosive liquids, liquids with fibrous and solid substances, agricultural slurry, as well as generally dirty and muddy water.
HIGH PRESSURE PUMPS
TM-TMB - MULTI-STAGE HORIZONTAL PUMPS
One of the most complete product ranges in the sector, with over 160 different versions available. For applications where high pressure is required, such as lifting, refrigeration or heating plants, artificial snow or irrigation, washing systems and boilers. Low noise and high resistance to wear, thanks in part to the oversized ball bearings. This pump can also be coupled to diesel engines with SAE3 connection. Soft shaft seal as standard, various types of mechanical seal also possible.
TMV - MULTI-STAGE VERTICAL PUMPS
Suitable anywhere high pressure is required, such as lifting, refrigeration or heating plants, artificial snow or irrigation, washing systems and boilers. Low noise and high resistance to wear, thanks in part to the oversized ball bearings. Possibility to change outlet and inlet orientation. Various types of mechanical or soft shaft seals (standard).
MK - MULTI-STAGE VERTICAL PUMPS
Compact, multi-stage vertical pumps, suitable for lifting plants with or without autoclave, irrigation and washing systems and all other applications where high pressure is required. These pumps are configured with a bearing designed to support the axial thrust of the pump and allow coupling to any other standardised motor. Dual wear ring and bushes to guarantee maximum reliability.
Available the close-coupled version MKM as well, with reduced overall dimensions and reduced costs.
OP - MULTI-STAGE HORIZONTAL PUMPS
Suitable for pumping clean water and chemically non-corrosive liquids, for residential uses, irrigation, agriculture and automated distribution in medium-small tanks.